Replace the toner collection unit
Replace the toner collection unit when the control panel prompts you.
NOTE:
The toner collection unit is designed for a single use. Do not attempt to empty the toner
collection unit and reuse it. Doing so could lead to toner being spilled inside the product, which could
result in reduced print quality. After use, return the toner collection unit to HP’s Planet Partners program
for recycling.
NOTE:
If printing documents that require heavy toner coverage, the toner collection unit can fill
quickly. If printing these types of documents, HP recommends that you have another toner collection unit
available.
1.
Open the front door. Make sure that the door
is completely open.
104
Chapter 7 Print cartridges, toner collection unit, and other supplies
ENWW
2.
Grasp the blue label at the top of the toner
collection unit and remove it from the product.
3.
Place the attached blue cap over the blue
opening at the top of the unit.
4.
Remove the new toner collection unit from its
packaging.
ENWW
Replacement instructions
105
5.
Insert the bottom of the new unit into the
product first and then push the top of the unit
until it clicks into place.
6.
Close the front door.
NOTE:
If the toner collection unit is not
installed correctly, the front door does not
close completely.
To recycle the used toner collection unit, follow the instructions included with the new toner collection
unit.
106
Chapter 7 Print cartridges, toner collection unit, and other supplies
ENWW